邮箱: 2408623367@qq.com
电话: +86 13512908623
地址: Baixin Industrial Park, Ninghe District, Tianjin
The pneumatic knife gate valve is a relatively complex automatic control instrument, consisting of various pneumatic components and a valve body. It is commonly used in applications requiring rapid shutoff or opening. Double-acting: two-position control of valve opening and closing; Single-acting (spring return): the valve automatically opens or closes in the event of electrical and pneumatic circuit shutoff or failure.
Technical parameter range
Nominal pressure:
0.6Mpa,1.0Mpa,1.6Mpa,2.5Mpa,10K,150Lb
Nominal diameter: DN50~2000mm NPS2"~80"
(depending on the material and medium properties)
Operating temperature: -38 to +1100°C (specific temperature range depends on the sealing conditions)
Link flange: ANSIB16.5, GB/T9113, JB/T79,
HG. SH. JIS, DIN, NF. BS2Cr25Ni20
Main materials: C.I, WCB, ZG1Cr18Ni9Ti,
ZG1Cr18Ni12Mo2Ti, CF8, CF8M, CF3. CF3M.
Sealing type: hard seal, soft seal
Leakage: Hard seal: D (liquid 0.1XDNmm3/s) Soft seal:
A (zero leakage) accessory: installation flange